Driver Safety Meetings
Regular driver safety
meetings can be an effective way of providing safety education, raising
safety awareness, implementing new policies and procedures and promoting a
team spirit. The more positive and productive a learning experience these
meetings are, the greater the impact on your bottom line. Here are some
thoughts and suggestions that can help:
Set clear objectives. This not only provides a focus for
the meeting but it will help you evaluate
the effectiveness of your meeting.
Have an agenda for each meeting. Distribute it —
along with the date, time and location of the meeting — to all
meetings participants in advance. Your agenda ought to include a
description of the meeting’s objectives and a list of the topics to
be covered. This will give drivers a chance to prepare for the meeting and
be able to better participate in discussions
Have a list of discussion
points and action items you want to touch upon for each agenda item. Set
tentative times for each item and then stick to them and your meeting
timeframe. When meetings go over time, drivers generally tend to get uneasy
and their attention wanders.
Follow your agenda, using it as a checklist to ensure
that all agenda topics are covered.
Stay on time and keep control. If your meeting is getting
off track, redirect it back to the topic being discussed by saying
something like: “That’s a topic for a different meeting.”
Be sure to make a note of that topic for discussion at another time. Not
only will this enable you to keep to your meeting agenda, it shows drivers that you value their input.
Look for opportunities to recognize drivers who
participate in discussions.
Consider using prizes as a way to keep drivers’
interest. For example, offer things such as company merchandise, movie
passes, gift cards, etc., for correct responses.
When addressing any problems, do so constructively. The
emphasis needs to be on resolving the problem,
not on placing blame.
Have someone take notes during the meeting, documenting
any assignments or changes that need to be made. These meeting notes should
be distributed to all meeting participants.
Be sure to follow up with all meeting participants on any
matters that were to be addressed. This can be
done at the next meeting or through company communications such as notices
in paychecks and postings on bulletin boards. If you don’t react in a
timely manner, you’re sending the message that driver input
doesn’t matter, wherein drivers might figure they shouldn’t
bother offering their thoughts, suggestions and ideas.
Evaluate the effectiveness your meetings. Ask drivers
what they thought of the meeting and what could be done to improve the next
one. This will make drivers feel like a part of the team and will help make
your meetings more efficient.
All driver safety meetings should be supported by
company managers, and they should attend the meetings. By not doing so,
these managers are indirectly saying that driver safety meetings are not
important. This could have a negative impact on your safety programs. It is
beneficial to have managers mingle with drivers both before and after the
Safety meetings can be made more pleasant if you
include refreshments. This could be anything from coffee and doughnuts to a
buffet breakfast or lunch. However, food should be served before or after
the meeting, so as to limit distractions. BI
Common collision factors
There are six common types of improper driving which
can lead to collisions, finds the national Safety Council (NSC). They are:
- Right of way encroachment
- Poor lane change
- Improper passing
- Improper turns
The NSC estimates that these six factors are involved
in nearly 80 percent of all collisions.
The way to avoid these accidents, NSC advises, is for
drivers to drive courteously and defensively, taking responsibility for
themselves and their actions, and to keep an eye on other motorists,
anticipating and recognizing potential mistakes and improper driving
behavior that create safety hazards.
David Kolman is a veteran truck communicator, keynote
speaker and long-haul trucker. Commissioned as an Honorary Colonel on the
Kentucky governor’s staff for his work promoting traffic safety, he
actively participates in trade associations and reports news and
information about the trucking industry for broadcasting and print media.
Equipment news roundup
Cube Route Visibility Solution is an on-demand, subscription-based
logistics management solution that provides a simple, affordable way to
monitor and manage delivery fleets. Using the Cube Route solution,
dispatchers, managers and customer service representatives have a real-time
view of driver movement and order status across an entire operation.
Among other things, the Cube Route solution provides
real-time and historical information to set delivery benchmarks, ensures
that drivers are accountable for their routes and measures productivity
against an established plan.
Using GPS-enabled mobile phones, Cube Route initiates
visibility the moment a driver departs for the first stop. As soon as the
driver leaves for that stop, GPS pings are sent from the phone,
automatically updating the location, speed and direction on maps on a
dedicated Web site that can be accessed anywhere through a standard Web
Mack Trucks has
partnered with Allison Transmission in the Allison EDGE Program to make
Allison transmissions the exclusive automatic transmission offering in Mack
Vision, Pinnacle and CH models. The program provides customers with a
broader range of automatic transmission options.
Paccar has targeted a
goal of 30 percent improvement in vehicle fuel efficiency for selected
medium-duty applications over the next seven years utilizing hybrid
technology as a key contributor to achieving this objective. Hybrid power
systems consist of an electric motor generator and onboard energy storage
system. Power from the engine is used to drive the vehicle directly or to
charge the storage device.
Hybrid power systems provide maximum fuel savings in
applications where frequent braking and acceleration is required, such as
local delivery applications. There is also a benefit from lower maintenance
costs due to reduced wear on the braking